Air rises, so air makes the top of a radiator cold. Sludge sinks, so sludge makes the bottom cold. If your radiator is warm at the top and cool along the bottom, sludge is the likely cause.
What is sludge?
Steel radiators and pipework slowly corrode inside, forming a black iron oxide called magnetite. It settles in the bottom of radiators, restricts flow, and can block the boiler’s heat exchanger, making it noisy and less efficient.
Signs it’s sludge
- Cold patches at the bottom or middle of radiators
- Dark, dirty water when you bleed a radiator
- A noisy boiler, or one that keeps overheating
- Radiators furthest from the boiler barely warm
The fixes
- Remove and flush a single radiator: fine if only one or two are affected.
- Chemical system clean: a cleaner circulated through the system, then drained and refilled with inhibitor.
- Powerflush: a pump pushes water and cleaner through each radiator at high flow. Best for heavily sludged systems.
- A magnetic filter afterwards, to catch new sludge before it builds up again.
We’ll tell you honestly which you need. A powerflush isn’t always necessary.
This guide is general information. If you’re ever unsure, or anything involves gas, stop and call a Gas Safe registered engineer.