Skip to content

New combi boilers, fitted from £3,300Combis fitted from £3,300 Get your price in 2 minutesGet your price

Covering every BS, BA, GL, SN, NP and CF postcode

Gas Safe registered, no. 987082 Request a callback Contact Track a job Emergency line 24/7 0117 463 7103

Powerflushing

Clears the sludge that leaves radiators cold and makes boilers work harder, and we'll tell you if you don't need one.

Gas Safe registered, no. 987082

System powerflush

From £525

Typical 3-bed home with up to 10 radiators.

Book online0117 463 7103

Signs your system needs cleaning

  • Radiators cold at the bottom or patchy across the middle
  • Dark, dirty water when you bleed a radiator
  • Boiler noisy or “kettling”
  • New boiler going in on an old system

How we do it

  1. Connect a powerflush pump to the system and circulate cleaning chemicals at high flow.
  2. Work through each radiator in turn to dislodge sludge and scale.
  3. Flush with clean water until it runs clear.
  4. Add inhibitor to protect against future corrosion, and fit or clean a magnetic filter.

Most homes take most of a day. You’ll need the heating off while we work.

Is it always needed?

No. A lighter chemical clean is enough for some systems, and very old or fragile pipework may not suit a powerflush. The engineer will check first and explain the options.

Price

System powerflushTypical 3-bed home with up to 10 radiators.From £525

All prices include VAT at 20%.

Our four house rules, on every job

The price before the work
Our prices are on this site, and every repair is priced and agreed with you before we start.
A properly qualified engineer
Gas work is only ever done by a Gas Safe registered engineer. Ours is carried out by TempZilla (Gas Safe no. 987082).
Honest timings
For urgent jobs (no heating, no hot water or a leak you can’t stop) we aim to attend the same or next working day. If that changes, we tell you.
Straight advice
If a repair makes more sense than a new boiler, or you don’t need a powerflush, we’ll say so.

Questions about powerflushing

How long does a powerflush take?

Usually most of a day for a typical home.

Will it fix every cold radiator?

It fixes cold spots caused by sludge. Cold radiators caused by valves, balancing or a pump fault need a different repair. The engineer checks before starting.

Do I need one before a new boiler?

Manufacturers require the system to be cleaned before a new boiler is fitted. The survey decides which method is right.

Let’s get you sorted

Book online in a few minutes and we’ll confirm your appointment with you directly.

Call Book online