How an unvented cylinder works
An unvented cylinder is fed straight from the mains, so your showers and taps run at mains pressure and there’s no cold water tank in the loft. The water is heated by your boiler, an immersion heater, or both, and stored ready to use, so two showers can run at once.
Is it right for your home?
It needs good mains pressure and flow, so we test both before recommending one. Unvented cylinders suit homes with two or more bathrooms and work with system and regular boilers. If your mains supply is weak, we’ll tell you and suggest what will work better.
Why the yearly service matters
Unvented cylinders store hot water under pressure, so they have safety devices that must keep working: the temperature and pressure relief valve, the expansion vessel and the pressure reducing valve. Most manufacturers need a yearly service to keep the warranty valid. We check and test every safety device and recharge the expansion vessel if it needs it.
Faults we fix
- Water dripping from the tundish or the pipe running outside
- No hot water, or water that never gets properly hot
- Pressure that drops or changes when taps are used
- Banging or noisy pipes when the cylinder heats up
The rules
Building Regulations say unvented cylinders must be fitted by someone holding the unvented hot water (G3) qualification, and the installation must be notified to Building Control. We’ll give you the paperwork.
| Plumbing call-out, first hourCovers the visit and the first hour on site. Further labour and parts are quoted before we start. | £78 |
|---|---|
| Plumbing labourAfter the first hour. Charged in 30-minute blocks. | £54 per hour |
All prices include VAT at 20%.


