When a modern boiler stops, it shows a code that tells the engineer where to look. Some point to things you can check yourself. Others mean it’s time to book. Codes vary between models, so check your manual too.
Looking for one code? Our boiler fault code finder looks it up for you and tells you what to do.
Low pressure codes
These are the ones you can usually fix yourself by topping up the pressure.
| Brand | Code |
|---|---|
| Worcester Bosch | CE 207 |
| Vaillant | F.22 |
| Ideal | F1 |
| Baxi | E119 |
| Glow-worm | F.22 |
Ignition and flame codes
The boiler tried to light and couldn’t, or the flame went out.
| Brand | Code | Meaning |
|---|---|---|
| Worcester Bosch | EA 227 | No flame detected |
| Vaillant | F.28 | Failed to light on start-up |
| Vaillant | F.29 | Flame lost while running |
| Ideal | L2 | Ignition lockout |
| Ideal | F2 | Flame loss |
| Baxi | E133 | Gas supply interrupted or ignition failure |
| Glow-worm | F.28 / F.29 | Failed to light / flame lost |
Before you book: check your other gas appliances work, the meter has credit, and the gas valve under the boiler is open. In freezing weather, check the condensate pipe isn’t frozen, as that’s a very common cause of flame codes in winter.
Everything else
Fan faults, sensor faults, overheating and circuit board codes need an engineer. Reset the boiler once. If the same code comes back, don’t keep resetting. Note the code and book a repair, and the engineer can bring the likely part.
Brand pages
Our Worcester Bosch, Vaillant, Ideal, Baxi, Glow-worm and Vokera pages have more on each manufacturer.
This guide is general information. If you’re ever unsure, or anything involves gas, stop and call a Gas Safe registered engineer.