Radiators are sold by heat output, in watts or BTU per hour. Too small and the room never gets warm. Too big and you’ve paid for more radiator than you need.
How we work it out
We multiply the room’s volume by a heat figure for that type of room and the temperature people usually like it: 21°C in living rooms, 18°C in bedrooms and kitchens, 22°C in bathrooms. Then we add extra for single glazing, solid or uninsulated walls, more outside walls and north-facing rooms. One watt is about 3.41 BTU per hour.
What ΔT50 means
Radiator outputs are measured at a set difference between the temperature of the water in the radiator and the room, called delta T. Most UK listings quote ΔT50, which matches a gas boiler running at normal temperatures. Heat pumps and some boilers set up to run cooler work at a lower delta T, where the same radiator gives out much less heat, so you’d need a bigger one.
Tips before you buy
- Fit radiators under windows where you can. It warms the cold air coming off the glass.
- Swapping like for like? Measure the distance between the pipes so the new radiator lines up.
- Thermostatic radiator valves let you set each room to its own temperature.
- Radiator cold at the bottom? It may be sludge rather than size. See radiator cold at the bottom.
Want us to fit them?
We supply and fit radiators, valves and controls. See radiators and heating controls or book an engineer.