A toilet that keeps running can waste a lot of water. There are two usual culprits, and you can tell which by looking inside the cistern.
Take the lid off
Lift the cistern lid. Inside you’ll see a fill valve (which lets water in) and a flush valve (which lets water out into the pan).
Is the water level too high?
If water is level with the top of the overflow, or trickling into it, the fill valve isn’t shutting off. Many valves have an adjustment screw or clip to lower the float. If adjusting doesn’t help, the valve washer or the whole valve needs replacing.
Is water trickling into the pan with the level normal?
The flush valve seal at the bottom of the cistern isn’t sealing. On push-button toilets, the seal or washer wears or gets limescale on it. A new seal or flush valve fixes it.
Overflow running outside?
Older toilets have an overflow pipe to the outside. If it’s dripping, the fill valve needs attention.
Parts vary between makes. If you’d rather not take it apart, book a plumber and we’ll bring common parts.
This guide is general information. If you’re ever unsure, or anything involves gas, stop and call a Gas Safe registered engineer.